Vivotek | Vivotek FD1837H, 8137HV specification

						VIVOTEK
					URL Command Document for All Series


						99)

		s<0~(m-1)>_h264_bitrate	1000~4000000	3000000	4/4	Set bit rate in bps when
			0			choosing cbr in
						“ratecontrolmode”.

		s<0~(m-1)>_h264_maxframe	1~30	30	1/4	Set maximum frame rate in
						fps (for h264).

		s<0~(m-1)>_h264_profile	0~2	1	1/4	Indicate H264 profiles
						0: baseline
						1: main profile
						2: high profile

		s<0~(m-1)>_mjpeg_priorit	framerate,	framerate	4/4	The policy to apply when
		ypolicy	imagequality			the target bit rate is not
						sufficient to satisfy current
						encoded conditions.
						“framerate” indicates
						frame rate first.
						“imagequality” indicates
						image quality first.
		s<0~(m-1)>_mjpeg_rateco	cbr, vbr	vbr	4/4	cbr, constant bitrate
		ntrolmode				vbr, fix quality

		s<0~(m-1)>_mjpeg_quant	1~5, 99, 100	3	4/4	Quality of JPEG video.
						1 = worst quality, 5 = best
						quality.
						100: Use the quality level in
						"qpercent"
						99: Use the quality level in
						"qvalue"

		s<0~(m-1)>_mjpeg_maxfram	1~30	30	1/4	Set maximum frame rate in
		e				fps (for JPEG).

		s<0~(m-1)>_mjpeg_qvalue	10~200	49	4/4	Manual video quality level
						input.
						(s<0~(m-1)>_mjpeg_quant =
						0)

		s<0~(m-1)>_mjpeg_qpercent	1~100	49	4/4	Set quality by percentage.
						1: Worst quality
						100: Best quality
						(s<0~(m-1)>_mjpeg_quant =
						100)

		s<0~(m-1)>_mjpeg_bitrate	1000~400000	6000000	4/4	Set bit rate in bps when

User's Manual - 147

Image 147

Vivotek FD1837H, 8137HV user manual Vivotek

Contents

FD8137H/8137HV Table of Contents 122 Revision History Overview Package Contents Symbols and Statements in this DocumentRead Before Use Physical Description Hardware Installtion FD8137H Hardware Reset Removing Dome Cover Installation Vivotek Network Deployment Set up the Network Camera through Power over Ethernet PoE Hardware Installtion FD8137HV Hardware Installation Wall Mount Ceiling Mount Pan Tilt Rotate Internet connection via a router Network Camera Software Installation Ready to Use To adjust the viewing angle -- 3-axis mechanism design Completion Using Web Browsers Accessing the Network Camera Vivotek Tips Using Rtsp Players Using 3GPP-compatible Mobile Devices Using Vivotek Recording Software Main Resize Buttons Configuration Area Vivotek Go to Video Control Buttons Client Settings MP4 Saving Options Joystick Settings Buttons Configuration Configuration System System General settings System time System Homepage layout General settings Theme Options Vivotek Log server settings System LogsSystem log Internet System Parameters Access log System Maintenance General settings Upgrade firmwareGeneral settings Reboot Import/Export files General settings Restore Vivotek Tips Media Image Day/Night Settings Image settings Exposure Window Check Enable this profile Privacy mask Media Video Stream settings Parameters of the multiple streams MediaNOTE Video Vivotek Vivotek Vivotek Media Audio Audio Settings Network Type Network General settings PPPoE Point-to-point over Ethernet Error Router does not support UPnP port forwarding Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Http streaming Network Streaming protocols Rtsp Streaming VLC Vivotek Express link Network Ddns Ddns Dynamic domain name service Manual setup CustomSafe100 Requirements for QoS Network QoS Quality of Service QoS/DSCP the DiffServ model Network Snmp Simple Network Management Protocol Snmp Configuration Account Management Root PasswordSecurity User accounts Privilege Management Security Https Hypertext Transfer Protocol over SSL Create and Install Certificate Method Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter IP address range 192.168.2.x will be bolcked Administrator IP address Security Ieee Maximum length of password is 200 symbols Vivotek X1.8 PTZ PTZ settings X3.3 X1.8 Vivotek Event Event Event settings Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Follow the steps below to enable motion detection Percentage = 30% Vivotek Applications Tampering detection Applications Digital input Vivotek Yes No Recording Settings Recording Recording settings Continuous recording NAS server Vivotek 20130210 20130211 20130212 Local storage SD card management SD card stausSD card control Searching and Viewing the Records Local storage Content management Search Results Click to switch pages Appendix URL Commands for the Network Camera General CGI URL Syntax and Parameters Security Level Method GET/POST Get Server Parameter Values Vivotek Groupname Value to assigned Assign value to the parameter groupnameReturn Vivotek Available parameters on the server Group system System Vivotek None Vivotek System.info Group status Status Group security Digital input behavior defineSecurity Group dii0~ndi-1 Group network Network TLS Subgroup of network ieee8021x Subgroup of network qoscos Subgroup of network qosdscpSubgroup of network ipv6 Subgroup of network https Subgroup of network ftpSubgroup of network http Port Subgroup of networkrtsps0~n-1multicast, n is stream count Subgroup of network rtsp Group ipfilter IP FilterSubgroup of network rtp Subgroup of network pppoe IPv6 address list Ipfilter for Onvif Group videoin Rbgain indicates using rgain GbainRbgain indicates using Rgain and gbain Video input Maxgain Manual set maximum gain Value Wdrstrength WDR Pro strength Low Medium High Stream Svc is only supported with Vivotek Group videoinprofilei0~m-1 Alternative video input profiles per channelChoosing cbr Ratecontrolmode Group imagec0~n-1for n channel products Image setting per channelIR cut control Group ircutcontrol Group audioinc0~n-1for n channel products Audio input per channel Time Shift settings Motion detection settingsGroup motionc0~n-1for n channel product Group tamperingc0~n-1for n channel product Tampering detection settings Express link Ddns UPnP port forwarding Group upnppresentationGroup upnpportforwarding Group snmp System logSnmp Group syslog Group layout Layout configuration Group capability Privacy maskCapability Group privacymaskc0~n-1for n channel product Vivotek Vivotek Mjpeg Videoinnresolution Timeshift Videoinstreamcodec ~ 15, 1~15Videoincodec Videoinflexiblebitrate Transmissionmode Vivotek Security Description get/set Group eventcustomtaskfilei0~2 Customized event script Group eventi0~2 Event setting Path to store media Actioncfmedia NULL, 0~4 Group serveri0~4 Server setting for event action Group mediai0~4 mediafreespace is used internally Media setting for event action Group recordingi0~1 Recording Vivotek Maxduration 60~3600 Group https Https Group eptzc0~n-1for n channel product Storage management settingEPTZ setting Region of interest Parameter Value Group exposurewinc0~n-1for n channel products Exposure window setting per channel Seamless recording setting DefaultGroup seamlessrecording Group vadp Vivotek Application Development Platform setting Group vadpmodulei0~n-1 Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\n Useful Functions8.1 Query Status of the Digital Input Stream number Capture Single Snapshot Account Management Upgrade Firmware System LogsMethod Post Syntax EPTZ Camera Control Vivotek EPTZ Recall EPTZ Preset Locations IP Filtering IP Filtering for Onvif Event/Control Http Tunnel Channel Method GET Get SDP of StreamsOpen the Network Stream Storage managements Command search Update, and queryStatus 235959’ is to search for records from the start of Jan 1 st If you want to search for a time period, please apply toOperation Ex. triggerTime=’2008-01-01 000000’+TO+’2008-01-01 Return Message Vivotek Command queryStatus Ex. Local storage status in XML formatEx. Local storage status in javascript format FilePath is in queryststus return message Http//servername/cgi-bin/admin/downloadMedias.cgi?FilePath Return Virtual input Timeshiftcnsmallow=1 Open Timeshift Stream timeshiftenable=1 Codectype Mjpeg, mpeg4, h264 Set codec type for Anystream Solution CapabilityvideoinresolutionVideo resolution in pixels Open Anystream This must be present if Mjpegquant is equal to 0 Input setting = worst quality, 5 = best QualityMjpegqvalue 10~200 Manual video quality level ~97 Input H264qvalue ~51 Manual video quality level This must be present ifH264quant is equal to 0 Method Post Export FilesUpload Files Currentlanguage ~20 Stime Etime Length File Description Media on demandStime Start time Etime End of document Play recordings for length seconds which start fromPlay recordings for length seconds which ends at Play file file Technical Specifications Technical Specifications Dimensions AMR-NB Standard Technology License Notice Liability Electromagnetic Compatibility EMC