Vivotek FD1837H, 8137HV user manual Event setting, Group eventi0~2

VIVOTEK

URL Command Document for All Series

7.23 Event setting

Group: event_i<0~2>

PARAMETER	VALUE	Default	SECURITY	DESCRIPTION
			(get/set)
name	string[40]	NULL	6/6	Identification of this entry.
enable	0, 1	0	6/6	Enable or disable this event.
priority	0, 1, 2	1	6/6	Indicate the priority of this event:
				“0” = low priority
				“1” = normal priority
				“2” = high priority
delay	1~999	10	6/6	Delay in seconds before detecting the
				next event.
trigger	boot,	boot	6/6	Indicate the trigger condition:
	di,			“boot” = System boot
	motion,			“di”= Digital input
	seq,			“motion” = Video motion detection
	recnotify,			“seq” = Periodic condition
	tampering,			“recnotify” = Recording notification.
	vi			“tampering” = Tamper detection.
				“vi”= Virtual input (Manual trigger)
triggerstatus	String[40]	triggerstatus	6/6	The status for event trigger
di	0, 1	1	6/6	Indicate the source id of di trigger.
				This field is required when trigger
				condition is “di”.
				One bit represents one digital input.
				The LSB indicates DI 0.
vi	0~7	0	6/6	Indicate the source id of vi trigger.
				This field is required when trigger
				condition is “vi”.
				One bit represents one digital input.
				The LSB indicates VI 0.
tampering	0 ~ 255	0	6/6	Indicate the source of the tampering
				detection. Each bit represents one
				channel, and the LSB indicates
				channel 1.

User's Manual - 167