VIVOTEK

To install the camera to a ceiling or wall:

1.Attach the alignment sticker to the ceiling/wall.

2.Through the two circles on the sticker, drill two pilot holes into the ceiling/wall.

3.The Network Camera can be mounted with the cable routed through the ceiling/wall or from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A as shown in the above picture.

4.Hammer the supplied plastic anchors into the holes.

5.Secure the camera with the supplied screws.

A

A

User's Manual - 9

Page 9
Image 9
Vivotek FD1837H, 8137HV user manual Vivotek