Vivotek 8137HV, FD1837H Tampering detection settings, Group tamperingc0~n-1for n channel product

VIVOTEK

URL Command Document for All Series

	schedule
i<0~(m-1)>_begintime	hh:mm	18:00	4/4	Begin time of
				schedule mode.
i<0~(m-1)>_endtime	hh:mm	06:00	4/4	End time of
				schedule mode.
i<0~(m-1)>_win_i<0~2>_enable	<boolean>	0	4/4	Enable motion
				window.
i<0~(m-1)>_win_i<0~2>_name	string[14]	<blank>	4/4	Name of motion
				window.
i<0~(m-1)>_win_i<0~2>_left	0 ~ 320	0	4/4	Left coordinate of
				window position.
i<0~(m-1)>_win_i<0~2>_top	0 ~ 240	0	4/4	Top coordinate of
				window position.
i<0~(m-1)>_win_i<0~2>_width	0 ~ 320	0	4/4	Width of motion
				detection window.
i<0~(m-1)>_win_i<0~2>_height	0 ~ 240	0	4/4	Height of motion
				detection window.
i<0~(m-1)>_win_i<0~2>_objsize	0 ~ 100	0	4/4	Percent of motion
				detection window.
i<0~(m-1)>_win_i<0~2>_sensitivity	0 ~ 100	0	4/4	Sensitivity of
				motion detection
				window.

7.13 Tampering detection settings

Group: tampering_c<0~(n-1)>for n channel product

NAME		VALUE		DEFAULT		SECURITY	DESCRIPTION
						(get/set)
enable		<boolean>	0		4/4		Enable or disable tamper detection.
duration	10 ~ 600		10		4/4		If tampering value exceeds the ‘threshold’ for
							more than ‘duration’ second(s), then tamper
							detection is triggered.

152 - User's Manual