Vlc | Vivotek FD1837H, 8137HV guide

VIVOTEK

Authentication: Depending on your network security requirements, the Network Camera provides

three types of security settings for streaming via RTSP protocol: disable, basic, and digest.

If basic authentication is selected, the password is sent in plain text format, but there can be potential risks of it being intercepted. If digest authentication is selected, user credentials are encrypted using MD5 algorithm, thus providing better protection against unauthorized access.

The availability of the RTSP streaming for the three authentication modes is listed below:

	Quick Time player	VLC
Disable	O	O
Basic	O	O
Digest	O	X

Access name for stream 1 ~ 3: This Network camera supports multiple streams simultaneously. The access name is used to differentiate the streaming source.

If you want to use an RTSP player to access the Network Camera, you have to set the video mode to H.264 and use the following RTSP URL command to request transmission of the streaming data. rtsp://<ip address>:<rtsp port>/<access name for stream 1 to 3>

For example, when the access name for stream 1 is set to live.sdp:

1.Launch an RTSP player.

2.Choose File > Open URL. A URL dialog box will pop up.

3.Type the above URL command in the text box.

4.The live video will be displayed in your player as shown

below.

Video 16:38:01 2013/02/25

rtsp://192.168.5.151:554/live.sdp

RTSP port /RTP port for video and RTCP port for video

■RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554.

■The RTP (Real-time Transport Protocol) is used to deliver video data to the clients. By default, the RTP port for video is set to 5556.

■The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by monitoring the Internet traffic volume. By default, the RTCP port for video is set to 5557.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even number and the RTCP port is the RTP port number plus one, and thus is always an odd number. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

User's Manual - 69

Image 69

Vivotek FD1837H, 8137HV user manual Vlc

Contents

FD8137H/8137HV Table of Contents 122 Revision History Overview Package Contents Symbols and Statements in this DocumentRead Before Use Physical Description Hardware Installtion FD8137H Hardware Reset Removing Dome Cover Installation Vivotek Network Deployment Set up the Network Camera through Power over Ethernet PoE Hardware Installtion FD8137HV Hardware Installation Wall Mount Ceiling Mount Pan Tilt Rotate Internet connection via a router Network Camera Software Installation Ready to Use To adjust the viewing angle -- 3-axis mechanism design Completion Using Web Browsers Accessing the Network Camera Vivotek Tips Using Rtsp Players Using 3GPP-compatible Mobile Devices Using Vivotek Recording Software Main Resize Buttons Configuration Area Vivotek Go to Video Control Buttons Client Settings MP4 Saving Options Joystick Settings Buttons Configuration Configuration System System General settings System time System Homepage layout General settings Theme Options Vivotek Log server settings System LogsSystem log Internet System Parameters Access log System Maintenance General settings Upgrade firmwareGeneral settings Reboot Import/Export files General settings Restore Vivotek Tips Media Image Day/Night Settings Image settings Exposure Window Check Enable this profile Privacy mask Media Video Stream settings Parameters of the multiple streams MediaNOTE Video Vivotek Vivotek Vivotek Media Audio Audio Settings Network Type Network General settings PPPoE Point-to-point over Ethernet Error Router does not support UPnP port forwarding Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Http streaming Network Streaming protocols Rtsp Streaming VLC Vivotek Express link Network Ddns Ddns Dynamic domain name service Manual setup CustomSafe100 Requirements for QoS Network QoS Quality of Service QoS/DSCP the DiffServ model Network Snmp Simple Network Management Protocol Snmp Configuration Security User accounts Root PasswordPrivilege Management Account Management Security Https Hypertext Transfer Protocol over SSL Create and Install Certificate Method Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter IP address range 192.168.2.x will be bolcked Administrator IP address Security Ieee Maximum length of password is 200 symbols Vivotek X1.8 PTZ PTZ settings X3.3 X1.8 Vivotek Event Event Event settings Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Follow the steps below to enable motion detection Percentage = 30% Vivotek Applications Tampering detection Applications Digital input Vivotek Yes No Recording Settings Recording Recording settings Continuous recording NAS server Vivotek 20130210 20130211 20130212 Local storage SD card management SD card stausSD card control Searching and Viewing the Records Local storage Content management Search Results Click to switch pages Appendix URL Commands for the Network Camera General CGI URL Syntax and Parameters Security Level Method GET/POST Get Server Parameter Values Vivotek Groupname Value to assigned Assign value to the parameter groupnameReturn Vivotek Available parameters on the server Group system System Vivotek None Vivotek System.info Group status Status Security Digital input behavior defineGroup dii0~ndi-1 Group security Group network Network TLS Subgroup of network ieee8021x Subgroup of network qoscos Subgroup of network qosdscpSubgroup of network ipv6 Subgroup of network http Subgroup of network ftpPort Subgroup of network https Subgroup of networkrtsps0~n-1multicast, n is stream count Subgroup of network rtsp Subgroup of network rtp IP FilterSubgroup of network pppoe Group ipfilter IPv6 address list Ipfilter for Onvif Rbgain indicates using Rgain and gbain Rbgain indicates using rgain GbainVideo input Group videoin Maxgain Manual set maximum gain Value Wdrstrength WDR Pro strength Low Medium High Stream Svc is only supported with Vivotek Choosing cbr Alternative video input profiles per channelRatecontrolmode Group videoinprofilei0~m-1 IR cut control Image setting per channelGroup ircutcontrol Group imagec0~n-1for n channel products Group audioinc0~n-1for n channel products Audio input per channel Time Shift settings Motion detection settingsGroup motionc0~n-1for n channel product Group tamperingc0~n-1for n channel product Tampering detection settings Express link Ddns UPnP port forwarding Group upnppresentationGroup upnpportforwarding Snmp System logGroup syslog Group snmp Group layout Layout configuration Capability Privacy maskGroup privacymaskc0~n-1for n channel product Group capability Vivotek Vivotek Mjpeg Videoinnresolution Videoincodec Videoinstreamcodec ~ 15, 1~15Videoinflexiblebitrate Timeshift Transmissionmode Vivotek Security Description get/set Group eventcustomtaskfilei0~2 Customized event script Group eventi0~2 Event setting Path to store media Actioncfmedia NULL, 0~4 Group serveri0~4 Server setting for event action Group mediai0~4 mediafreespace is used internally Media setting for event action Group recordingi0~1 Recording Vivotek Maxduration 60~3600 Group https Https EPTZ setting Storage management settingRegion of interest Group eptzc0~n-1for n channel product Parameter Value Group exposurewinc0~n-1for n channel products Exposure window setting per channel Seamless recording setting DefaultGroup seamlessrecording Group vadp Vivotek Application Development Platform setting Group vadpmodulei0~n-1 Di0=state\r\n Di1=state\r\n Di2=state\r\n Di3=state\r\n Useful Functions8.1 Query Status of the Digital Input Stream number Capture Single Snapshot Account Management Upgrade Firmware System LogsMethod Post Syntax EPTZ Camera Control Vivotek EPTZ Recall EPTZ Preset Locations IP Filtering IP Filtering for Onvif Event/Control Http Tunnel Channel Open the Network Stream Get SDP of StreamsStorage managements Method GET Command search Update, and queryStatus Operation If you want to search for a time period, please apply toEx. triggerTime=’2008-01-01 000000’+TO+’2008-01-01 235959’ is to search for records from the start of Jan 1 st Return Message Vivotek Command queryStatus Ex. Local storage status in XML formatEx. Local storage status in javascript format FilePath is in queryststus return message Http//servername/cgi-bin/admin/downloadMedias.cgi?FilePath Return Virtual input Timeshiftcnsmallow=1 Open Timeshift Stream timeshiftenable=1 Video resolution in pixels Solution CapabilityvideoinresolutionOpen Anystream Codectype Mjpeg, mpeg4, h264 Set codec type for Anystream Mjpegqvalue 10~200 Manual video quality level ~97 Input setting = worst quality, 5 = best QualityInput This must be present if Mjpegquant is equal to 0 H264qvalue ~51 Manual video quality level This must be present ifH264quant is equal to 0 Upload Files Export FilesCurrentlanguage ~20 Method Post Stime Media on demandStart time Etime Stime Etime Length File Description Play recordings for length seconds which ends at Play recordings for length seconds which start fromPlay file file End of document Technical Specifications Technical Specifications Dimensions AMR-NB Standard Technology License Notice Liability Electromagnetic Compatibility EMC