Cadillac 2009 owner manual Rear Vision Camera Error Messages

To turn the symbols on or off:

1.Make sure that URPA has not been disabled.

2.Shift into P (Park).

3.Press the CONFIG hard key to enter the configure menu options, then press the CONFIG hard key repeatedly until Display is selected or touch

the Display screen button.

4.Select the Rear Camera Options screen button. The Rear Camera Options screen will display.

5.Touch the Symbols screen button. The screen button will be highlighted when on.

Rear Vision Camera Error Messages

Service Rear Vision Camera System: This message can display when the system is not receiving information it requires from other vehicle systems.

Rear Vision Camera System Unavailable: Displays when the system is not receiving information it requires from other vehicle systems.

If any other problem occurs or if a problem persists, see your dealer/retailer.

{CAUTION:

The Rear Vision Camera (RVC) system does not replace driver vision. RVC does not:

•Detect objects that are outside the camera’s field of view, below the bumper, or underneath the vehicle.

•Detect children, pedestrians, bicyclists, or pets.

Do not back the vehicle by only looking at the rear vision camera screen, or use the screen during longer, higher speed backing maneuvers or where there could be cross-traffic. Your judged distances using the screen will differ from actual distances.

So if you do not use proper care before backing up, you could hit a vehicle, child, pedestrian, bicyclist, or pet, resulting in vehicle damage, injury, or death. Even though the vehicle has the RVC system, always check carefully before backing up by checking behind and around the vehicle.

2-54