Cadillac 2009 owner manual License Plate Lamp

2. Remove the two screws from the taillamp assembly.

3.Pull the taillamp assembly straight back to remove.

4.Turn the bulb socket counterclockwise to remove it from the taillamp assembly.

5.Pull the bulb straight out from the socket.

6.Press a new bulb into the socket, insert it into the taillamp assembly and turn the bulb socket clockwise until it clicks.

7.Reinstall the taillamp assembly and tighten the screws.

License Plate Lamp

To replace one of these bulbs:

1. Reach under the rear bumper for the bulb socket.

2.Turn the bulb socket counterclockwise and pull the bulb socket out of the connector.

3.Pull the old bulb from the bulb socket, keeping the bulb straight as you pull it out.

4.Install the new bulb.

5.Reverse Steps 1 through 3 to reinstall the bulb socket.

6-52