Cadillac 2009 owner manual Adjusting the Brightness and Contrast of the Screen, Symbols

4.Select the Video screen button. When the Video screen button is highlighted the RVC system

is on.

The delay that is received after shifting out of

R (Reverse) is approximately 10 seconds. The delay can be cancelled by performing one of the following:

•Pressing a hard key on the navigation system.

•Shifting in to P (Park).

•Reach a vehicle speed of 7 mph (11 km/h).

There is a message on the rear vision camera screen that states “Check Surroundings for Safety”.

Adjusting the Brightness and Contrast of the Screen

To adjust the brightness and contrast of the screen, press the CONFIG hard key while the rear vision camera image is on the display. Any adjustments made will only affect the rear vision camera screen.

](Brightness): Touch the + (plus) or – (minus) screen buttons to increase or decrease the brightness of the screen.

_(Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen.

Symbols

The navigation system may have a feature that lets the driver view symbols on the navigation screen while using the rear vision camera. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution symbols. If URPA has been disabled and the symbols have been turned on, the Rear Parking Assist Symbols Unavailable error message may display. See Ultrasonic Rear Parking Assist (URPA) on

page 2-50.

The symbols appear when an object has been detected by the URPA system. The symbol may cover the object when viewing the navigation screen.

2-53