3.Say the name tag of the person to call.

If the system clearly recognizes the name tag it responds with “OK, calling, <name tag>” and dials the number.

If the system is unsure it recognizes the right name tag, it confirms the name tag followed by a tone. If the name tag is correct, say “Yes”. The system responds with “OK, calling, <name tag>” and dials the number. If the name tag is not correct, say “No”. The system will ask for the name tag to be re-entered.

Once connected, the person called will be heard through the audio speakers.

Using the Re-dial Command

1.Press and hold b g for two seconds. The system responds with “Ready” followed by a tone.

2.After the tone, say “Re-dial”. The system responds with “Re-dial using <phone name>” and dials the last number called from the connected Bluetooth phone.

Once connected, the person called will be heard through the audio speakers.

Receiving a Call

When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle.

Press b g and begin speaking to answer the call.

Press c x to ignore a call.

Call Waiting

Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.

Press b g to answer an incoming call when another call is active. The original call is placed on hold.

Press b g again to return to the original call.

To ignore the incoming call, continue with the original call with no action.

Press c x to disconnect the current call and switch to the call on hold.

3-73

Page 233
Image 233
Cadillac 2009 owner manual Receiving a Call, Call Waiting, Using the Re-dial Command