Cadillac 2009 owner manual Pairing a Phone, Listing All Paired and Connected Phones

•The in-vehicle Bluetooth system automatically links with the first available paired cell phone in the order the phone was paired.

•Only one paired cell phone can be connected to the in-vehicle Bluetooth system at a time.

•Pairing should only need to be completed once, unless changes to the pairing information have been made or the phone is deleted.

To link to a different paired phone, see Linking to a Different Phone later in this section.

Pairing a Phone

1.Press and hold b g for two seconds. The system responds with “Ready” followed by a tone.

2.Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone.

3.Say “Pair”. The system responds with instructions and a four digit PIN number. The PIN number will be used in Step 4.

4.Start the Pairing process on the cell phone that will be paired to the vehicle. Reference the cell phone manufacturers user guide for information on

this process.

Locate the device named “General Motors” in the list on the cellular phone and follow the instructions on the cell phone to enter the four digit PIN number that was provided in Step 3.

5.The system prompts for a name for the phone. Use a name that best describes the phone. This name will be used to indicate which phone is connected. The system then confirms the name provided.

6.The system responds with “<Phone name> has been successfully paired” after the pairing process is complete.

7.Repeat Steps 1 through 7 for additional phones to be paired.

Listing All Paired and Connected Phones

1.Press and hold b g for two seconds. The system responds with “Ready” followed by a tone.

2.Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone.

3.Say “List”. The system lists all the paired Bluetooth devices. If a phone is connected to the vehicle, the system will say “Is connected” after the connected phone.

3-68