
Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check the lists below and on the next page before calling for assistance or service. If you still need help, see the “Requesting Assistance or Service” section on page 52.
If nothing operates, check the following:
Is the oven wired into a live circuit with the proper voltage? (See Installation Instructions.)
▼
Have you blown a household fuse or tripped a circuit breaker?
Other possible problems and their causes:
PROBLEM | CAUSE |
|
|
The oven will not | • You have not set the electronic control correctly. Refer to |
operate | the section in this manual describing the function you are |
| operating. |
| • You have accidentally set the control lock. See the “Using the |
| control lock” section on page 14. |
| • You have programmed a delayed start time. Wait for the start |
| time to be reached or cancel and reset the controls. |
|
|
The surface cook- | • You have blown a household fuse or tripped a circuit breaker. |
ing areas will not | Replace the fuse or reset the circuit breaker. |
operate | • You are not setting the control knob correctly. Push the |
| control knob in before turning to a setting. |
|
|
The control knob(s) | • You are not pushing in before turning. Push the control |
will not turn | knob(s) in before turning to a setting. |
|
|
The | • You did not press the Start/Enter pad. |
cycle will not | • You have programmed a delayed start time. Wait for the |
operate | start time to be reached or cancel and reset the controls. |
|
|
Display is blank | • You have set the display not to show the clock time. To |
| see the clock time again, press and hold the Clock pad for |
| 5 seconds. |
|
|
50