CARING FOR YOUR RANGE

Removing the oven door

For normal use of your oven, you do not need to remove the door. However, if you have to remove the door follow the instruc- tions in this section.

The oven door is heavy. Use both hands to remove and replace the door. Do not lift and carry the door by the handle. To remove and replace the door you may need help.

To remove:

1.Open door all the way.

NOTE: Two 532" Allen wrenches or 2 nails of similar diameter may be used if factory furnished door removal pins have been misplaced. Be careful not to damage porcelain finish.

Insert small end of pin here

To replace:

1.Fit hinge arms into slots in frame. Push in at lower corners to ensure that hinge arms are fully engaged.

2.Open the door all the way.

3.Remove the door removal pins from each hole.

4.Close the door.

NOTE: If the door does not operate freely, you have not installed it properly. Repeat Steps 1-4.

2.Insert small end of a door removal pin into each door hinge.

3.Grasp under handle and gently close door as far as it will shut. Pull door out at bottom to remove.

4.Set door aside on protected surface.

48

Page 48
Image 48
Whirlpool RS696PXE warranty Removing the oven door, To remove, To replace