
VIVOTEK
Remove the black cover as shown below so that you can
Tilt Ajustment | Focus Ctrl |
Screw | Zoom Ctrl |
|
Ceiling Mount
Wall Mount
1.Attach the alignment sticker to the ceilling/wall.
2.Through the two circles on the sticker, drill two pilot holes into the ceilling/wall.
3.The Network Camera can be mounted with the cable routed through the ceiling/wall or from the side. If you want to feed the cable through the ceiling/wall, drill a cable hole A as shown in the above picture.
4.Hammer the supplied plastic anchors into the holes.
5.Align the two holes on each side of the camera base with the two plastic anchors on the ceilling/wall, insert the supplied screws to corresponding holes and secure them with a screwdriver.
10 - User's Manual