VIVOTEK
Completion
1.Align the notches on the inner side of the black cover with the rivets on the sides of the lens, and then fix the black cover.
2.If you choose to feed the cable through the ceiling/wall, arrange the cables neatly through the cable hole A (not shown in the drawing). If you choose to feed the cable from the side, remove plate B.
3.Attach the dome cover to the camera as the direction shown below. Tighten two screws from the sides of the dome cover.
4.Finally, make sure all parts of the camera are securely installed.
Black Cover 
1 A
2
Dome Cover
Be aware of the cable route!
3
B
User's Manual - 17
