VIVOTEK
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation. There are two ways to enable the function:
1.Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a target area for close-up viewing without moving the camera physically. Please refer to below for detailed instruction.
Digital PTZ Operation (E-PTZ Operation)
If you select “Digital“, the e-PTZ control settings section will be displayed as shown below:
2010/12/10 17:08:56
2011/12/10 17:08:56
Select Stream: Select the stream #1 to set up the e-PTZ control. Please note that only stream #1 can possess its own preset and patrol settings. For detailed information about how to set up preset and patrol settings, please refer to page 85.
