
VIVOTEK
4.You will need an RJ45 crimping tool to attach the Ethernet wires to a connector. When done, connect the cable to the camera’s Ethernet RJ45 socket.
4
o:white/orange stripe O: orange solid
g:white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
o
O g
B b
G br
BR
1
2
3
4
5
6
7
8
A
Wall Mount
Ceiling Mount | A |
1.Attach the alignment sticker to the ceilling/wall.
2.Drill three pilot holes into the ceilling/wall.
3.If you want to feed the cable through the ceiling/wall, drill a cable hole A as shown in the above picture.
4.Hammer the supplied plastic anchors into the holes.
5.Secure the camera using the supplied screws.
User's Manual - 13