VIVOTEK

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow the steps below.

1.Connect your Network Camera behind a router, the Internet environment is illustrated below. Regarding how to obtain your IP address, please refer to Software Installation on page 17 for details.

 

IP address : 192.168.0.3

WAN (Wide Area Network )

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

Router IP address : from ISP

 

Internet

LAN (Local Area Network)

Router IP address : 192.168.0.1

Cable or DSL Modem

IP address : 192.168.0.2

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

2.In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router.

HTTP port: default is 80

RTSP port: default is 554

RTP port for audio: default is 5558

RTCP port for audio: default is 5559

RTP port for video: default is 5556

RTCP port for video: default is 5557

If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s manual.

3.Find out the public IP address of your router provided by your ISP (Internet Service Provider). Use the public IP and the secondary HTTP port to access the Network Camera from the Internet. Please refer to Network Type on page 59 for details.

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera. Please refer to LAN setting on page 59 for details.

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 60 for details.

16 - User's Manual

Page 16
Image 16
Vivotek fd8363 user manual Internet connection via a router