VIVOTEK
5.Tighten the rear cover, rubber seal and waterproof connector.
5 
6.Pass the cables through the center of the ball swivel mount bracket, one at a time.
7.Fasten the bracket to the camera using 3 hex socket screws.
7 | NOTE: |
|
The camera weighs up to 1.28 kgs. Make sure the mounting surface can support this camera.
6
8.Loosen the fastening ring on the mount bracket, and aim the camera at the area of your interest. When done, tighten the fastening ring.
Fastening ring
75º Tilt
360º Pan
8 - User's Manual
