Q. How fast will NetworKam check the status of digital inputs?
A. NetworKam will check input status in less than half a second. However, to avoid repeatedly checking conditions too often and to allow the devices connected to digital outputs to function properly, NetworKam will delay 3 seconds by default after each condition matches. Users may change it according to specific applications. During this period, any condition will be ignored.
Q. If I set NetworKam to send
A. It is recommended to use transient state rather than steady state. For instance, use ‘/’ and ‘\’ instead of ‘H’ and ‘L’ to let the condition be triggered only when state is changed.
Q. Why can I not access NetworKam when I setup some options in the application?
A. When NetworKam is triggered by events, snapshots will take more time to write them into memory and take further action like email or FTP. If the events occur too often, the system will always be busy with sending images. That will make users feel like the system responding too slowly. If it is in sequential mode, the uploading speed depends on the network utilization, server performance and how many users are accessing the video. Once the system is too busy to configure, use the restore factory default and reset button to save the system.
92
www.vivotek.com
