System log | Vivotek ip7135 specification

System log

The Network camera support log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to turn on the facility for receiving log from remote machine. Or you can use some software on Windows which is compliant to RFC 3164.

Check “Enable remote log” and input the “IP address” and “port” number of the log server to enable the remote log facility.

In the “Current log”, it displays the current system log file. The content of the log provides useful information about configuration and connection after system boot- up.

- 41 -

www.vivotek.com

Image 42

Vivotek ip7135 manual System log

Contents

Page Technical@vivotek.com Before You Use This Product Table of Contents FTP Technical specifications Package Contents Installation Hardware installation Software installation To install in Ethernet Initial Access to the Network Camera Check Network SettingsAdd Password to prevent Unauthorized Access How to Use Authentication Installing plug-in Primary user’s capability Main Screen with Camera View Digital Zoom Snapshot Client settings Page Re-connect Administrator’s capability Fine-tuning for Best Performance For Best Real-time Video Images Page Protect Network Camera by passwords Opening accounts for new users Build a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP address Http Rtsp Streaming Url http//Network Camera/setup/network.html Ddns Access List General Video SettingsAudio and Video Video orientation Audio settings Image Settings Email & FTP FTP Url http//Network Camera/setup/mailftp.html Motion detection Snapshot file name prefix Application settingsWeekly schedule Send out the snapshot while motion detection Sequential operation Method for sending snapshotPage Page System log Viewing system parameters Maintenance Troubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Length is the actual length of content Set server parameter values Where parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/dd Group Security Blank 192.168.0.99 255.255.255.0 554 Live.sdp 55585556 Group IPFilter Computer 176x144 for mobile640x480 For 512000 Gamr for mobile For 60Hz onlyAAC4 for computer 128000 12200 Usernameemail IP address Application page CGI commandScript.vssx 514 Syntax For snapshot Prefixappindex Capture single snapshot Maxsize Account management Privilege=conf Configuration file System logs Upgrade firmware Post data Technical specifications System Microphone Technology License Notice MPEG-4 AAC Technology Electromagnetic Compatibility EMC Liability