Camera control panel doesn’t show up in `Fixed Camera’ mode
If there is any PTZ camera attached, users should select the“RS485 Settings” as “PTZ camera”. Users have to configure the camera id, PTZ driver, and ports settings correctly. The ID is specific to the camera and necessary for multiple camera control. Please refer to the PTZ camera’s user manual for ID settings. The network camera has three
Note that the Network Camera can support multiple protocols to PTZ cameras. If there are PTZ camera functions can’t work, please see your PTZ camera’s user manual to check if your camera supports these functions.
- 49 -
www.vivotek.com
T: 886-2-82455282
F:
