Vivotek IP7151, IP7152 manual Audio and Video, Video Settings, Video orientation

Audio and Video

This product supports dual-stream. It provides two setting for video streams, but only one setting for audio.

Video Settings

“Video title” The text string can be displayed on video “Color” Select either for color or monochrome video display.

“Power line frequency”, the fluorescent light will flash according to the power line frequency that depends on local utility. Change the frequency setting to eliminate uncomfortable flash image when the light source is only fluorescent light.

Video orientation

“Flip” Vertically rotate the video.

“Mirror” Horizontally rotate the video. Check options both if the Network Camera is installed upside down.

“White balance” Adjust the value for best color temperature.

“Overlay title and time stamp on video” Check it the title is shown on video. There are different video quality settings for stream1 and stream2.

“Mode” It can be MPEG-4 or JPEG. If MPEG-4 is selected, it is streamed in RTSP protocol. If JPEG is selected, it is streamed in server push mode.

“Frame Size” If the mode is MPEG-4, there are four options, “176x144”, “320x240” and “640x480”. If the mode is JPEG, there are five options, “176x144”, “320x240” and “640x480”.

There are three dependent parameters provided in MPEG-4 mode for video performance adjustment.

“Intra frame period” The interval of intra frame.

“Maximum frame rate” This limits the maximal refresh frame rate, which can be combined with the “Video quality” to optimize bandwidth utilization and video quality.

- 38 -

www.vivotek.com

T: 886-2-82455282

F: 886-2-82455532