Vivotek IP8151 manual EPTZ Camera Control capability.eptz

VIVOTEK

zooming	wide or tele	Zoom without stopping for larger view or further view with zs
		speed, used for joystick control.
zs	0 ~ 6	Set the speed of zooming, “0” means stop.
	0 ~ 15 <SD81X1>
vx	<integer , excluding 0>	The slope of movement = vy/vx, used for joystick control.
vy	<integer>
vs	0 ~ 7	Set the speed of movement, “0” means stop.
	0 ~ 15 <SD81X1>
x	<integer>	x-coordinate clicked by user.
		It will be the x-coordinate of center after movement.
y	<integer>	y-coordinate clicked by user.
		It will be the y-coordinate of center after movement.
videosize	<window size>	The size of plug-in (ActiveX) window in web page
resolution	<window size>	The resolution of streaming.
stretch	<boolean>	0 indicates that it uses resolution (streaming size) as the range
		of the coordinate system.
		1 indicates that it uses videosize (plug-in size) as the range of
		the coordinate system.
focus	auto	Auto focus.
	far	Focus on further distance.
	near	Focus on closer distance.
iris	auto	Let the Network Camera control iris size.
	open	Manually control the iris for bigger size.
	close	Manually control the iris for smaller size.
speedlink	0 ~ 4	Issue speed link command.
gaptime	0~32768	The gaptime between two consecutive ptz commands for device.
		(unit: ms)
return	<return page>	Redirect to the page <return page> after the parameter is
		assigned. The <return page> can be a full URL path or relative
		path according to the current path. If you omit this parameter, it
		will redirect to an empty page.

8.10 ePTZ Camera Control (capability.eptz > 0)

Note: This request requires camctrl privileges.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>

162 - User's Manual