VIVOTEK
Motion Detection
This section explains how to configure the Network Camera to enable motion detection. A total of three motion detection windows can be configured.
2010/12/10 17:08:56
Follow the steps below to enable motion detection: Follow the steps below to enable motion detection:
Motion Detection Setting 1: For normal situations
Motion Detection Setting 2: For special situations
1� Click New to add a new motion detection window�
2.In the Window Name text box, enter a name for the motion detection window.
■To move and resize the window, drag and drop your mouse on the window.
■To delete window, click X on the top right corner of the window.
3.Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the
Sensitivity and Percentage slider bar�
4� Click Save to enable the settings�
5� Select Enable motion detection to enable this function�
For example:
|
| 2010/12/10 17:08:56 | ||
|
|
|
|
|
|
|
|
|
|
The Percentage Indicator will rise or fall depending on the variation between sequential images� When motions are detected by the Network Camera and are judged to exceed the defined threshold, the red bar rises� Meanwhile, the motion detection window will be outlined in red� Photos or videos can be captured instantly and configured to be sent to a remote server (Email, FTP) by utilizing this feature as a trigger source� For more information on how to set an event, please refer to Application on page 82�
68 - User's Manual
