Vivotek IP8151 manual lighting conditions

VIVOTEK

White balance: Adjust the value for the best color temperature�

■Auto: It will automatically adjust the color temperature of the light in response to different light sources.

The white balance setting defaults to Auto and works well in most situations�

■Keep current value: If you select this item, the current R gain & B gain value will be displayed for your reference� Follow the steps below to manually set the white balance to compensate for the ambient

lighting conditions�

1� Set the White balance to Auto and click Save�

2� Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color temperature automatically�

3.Select Keep Current Value to confirm the setting while the white balance is being measured.

4� Click Save to enable the new setting�

■ Manual: This item allows user to input the R gain & B gain manually.

Image Adjustment

■Brightness: Adjust the image brightness level, which ranges from -5 to +5.

■Saturation: Adjust the image saturation level, which ranges from -5 to +5. You can also select

Customize and manually enter a value�

■Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this function will be disabled if you enable WRD enhancement in the column below�

■Sharpness: Adjust the image sharpness level, which ranges from -3 to +3� You can also select Customize and manually enter a value�

■Gamma curve: This function is for user to select a proper gamma curve value to adjust the gray-scale of the monitor�

56 - User's Manual