Vivotek IP8330, 8332 IR cut control, Image setting per channel, Image setting for preview

VIVOTEK

7.10 IR cut control

Group: ircutcontrol

NAME		VALUE		SECURITY		DESCRIPTION
				(get/set)
mode		auto,	6/6			Set IR cut control mode
		day,
		night,
		di,
		schedule
daymodebegintime	00:00~23:59		6/6			Day mode begin time
daymodeendtime	00:00~23:59		6/6			Day mod end time
disableirled		<boolean>	6/6			Enable/disable IR led
bwmode	<boolean>		6/6		Switch to B/W in night mode if enabled
sensitivity		low,	6/6			Sensitivity of light sensor
		normal,
		high

7.11 image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE		SECURITY	DESCRIPTION
				(get/set)
brightness	-5 ~ 5		4/4		Adjust brightness of image according to mode settings.
saturation	-5 ~ 5		4/4		Adjust saturation of image according to mode settings.
contrast	-5 ~ 5		4/4		Adjust contrast of image according to mode settings.
sharpness	-3 ~ 3		4/4		Adjust sharpness of image according to mode settings.
mode		preview,	7/4		Preview => Apply the parameters of image without saving.
		restore,			Restore => Restore the previous saved image parameters.
		save			Save => Directly save the adjust image parameters.

7.12 image setting for preview

Group: imagepreview_c<0~(n-1)>for n channel products

NAME		VALUE		SECURITY	DESCRIPTION
				(get/set)
brightness	-5 ~ 5		4/4		Preview of brightness adjustment of image
					according to mode settings.
saturation	-5 ~ 5		4/4		Preview of saturation adjustment of image

120 - User's Manual