Alignment marks
IMPORTANT!
1.The camera comes with an angled cut sunshield. If you install the camera in a ceiling-mount orientation, you will need to change the sunshield's orientation.
To adjust the sunshield,
1-1. Loosen the sunshield seal ring using an included acrylic opener.
1-2. You do not need to remove the sunshield. Rotate the protruding ridge to the desired direction from which sunlight can cause glare.
1-3. Hold the sunshield and the camera using one hand, and then tighten the seal ring using the same acrylic opener.
Sunshield
Camera
Seal Ring
Sunshield
2.Although the camera and the cable gland on the camera's end are waterproof, the cable molding at the other end is not waterproof.
Measures should be taken to prevent water from leaking in through the cable-end molding, such as the use of expanding foam sealant, putties, and so on. Note that the cable gland on the camera should also be securely fastened to attain its waterproof functionality.
Cable Gland Waterproof | | Not Waterproof |
| | | | |
Cable Molding
