VIVOTEK

Hardware Reset

Reset Button

The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after reset, restore the factory settings and install again.

Reset: Press and release the reset button. Wait for the Network Camera to reboot.

Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note that all settings will be restored to factory default. Upon successful restore, the status LED will light constant blue (returned to the AP mode).

Micro SD/SDHC Card Capacity

This network camera is compliant with Micro SD/SDHC 8, 16, or 32GB and other preceding standard SD cards.

User's Manual - 9

Page 9
Image 9
Vivotek IP8336W user manual Hardware Reset