
VIVOTEK
Exposure Profile:
If you want to configure another sensor and exposure setting for an individual day/night/schedule mode, please click Profile to open the Profile of exposure settings page as shown below.
Activated period: You can select the Schedule mode to this profile. Please manually enter a range of time if you choose Schedule mode. Then check Save to take effect.
Please follow the steps below to set up a profile:
1.Select the Enable and apply this profile to checkbox.
2.Select the applicable period of time this profile will apply to.
3.Configure Exposure control settings in the folowing columns. Please refer to previous dicussions for detailed information.
4.Click Save to enable the setting and click Close to exit the window.
User's Manual - 45