VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure other motion detection settings for day/night/schedule mode, please click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion detection windows can be configured on this page as well.
2012/10/08 17:08:56
Please follow the steps beolw to set up a profile:
1.Create a new motion detection window.
2.Check Enable this profile.
3.Select and enter the time frame from the Schedule mode time fields. Please manually enter a range of during which the profile will apply.
4.Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event settings page. You can go to Event
>Event settings > Trigger to configure it as a trigger source. Please refer to page 85 for detailed information.
98 - User's Manual
