parameter | value | description |
|
|
|
nosync | 0, 1 | Specifies that there should be no sync (write) of |
|
| the corresponding configuration file on flash. If |
|
| parameter is omitted, a sync write will occur. |
(note: this parameter must be put at begin of parameter list)
<group>_<name>. value to assigned Assign <value> to the parameter <group>_<name>..
return<return page> Redirect to the page <return page> after the parameter is assigned. The <return page> can be a full URL path or relative path according the the current path. If you omit this parameter, it will redirect to an empty page.
(note: The return page can be a general HTML file(.htm, .html) or a Vivotek server script executable (.vspx) file. It can not be a CGI command. It can not have any extra parameters. This parameter must be put at end of parameter list)
Example: Set the IP address of server to 192.168.0.123
Available Parameters on the Server
Group: System
NAME | VALUE | DESCRIPTION |
|
|
|
- 68 -
www.vivotek.com
