Manuals / Brands / Photography / Security Camera / Vivotek / Photography / Security Camera

Vivotek PZ7112 General CGI URL Syntax and Parameters , Security Level , Get Server Parameter Values

1 126

Download 126 pages, 10.99 Mb

VIVOTEK

88 - User's Manual

General CGI URL Syntax and Parameters

CGI parameters are written in lower-case and as one word without any underscores or other separators. When the CGI

request includes internal camera parameters, these parameters must be written exactly as they are named in the camera

or video server. The CGIs are organized in functionally-related directories under the cgi-bin directory. The file

extension .cgi is required.

Syntax:

http://<servername>/cgi-bin/<subdir>[/<subdir>...]/<cgi>.<ext>

[?<parameter>=<value>[&<parameter>=<value>...]]

Example: Set digital output #1 to active

http://mywebserver/cgi-bin/dido/setdo.cgi?do1=1

Security Level

SECURITY LEVEL SUB-DIRECTORY DESCRIPTION

0 anonymous Unprotected.

1 [view] anonymous, viewer, dido,

camctrl

1. Can view, listen, talk to camera.

2. Can control DI/DO, PTZ of the camera.

4 [operator] anonymous, viewer, dido,

camctrl, operator

Operator access rights can modify most of the camera’s parameters

except some privileges and network options.

6 [admin] anonymous, viewer, dido,

camctrl, operator, admin

Administrator access rights can fully control the camera’s

operations.

7 N/A Internal parameters. Unable to be changed by any external

interfaces.

Get Server Parameter Values

Note: The access right depends on the URL directory.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/anonymous/getparam.cgi?[<parameter>]

[&<parameter>…]

http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>]

[&<parameter>…]

Contents

Main Page Overview Read Before Use Package Contents Physical Description Front panel Rear panel General I/O Terminal Block DI/DO Diagram Status LED Hardware Reset Installation Hardware Installation Network Deployment Setup the Network Camera over the Internet Page Set up the Network Camera through Power over Ethernet (PoE) (PZ71x1 only) Software Installation Accessing the Network Camera Using Web Browsers Page Using RTSP Players Using 3GPP-compatible Mobile Devices Using VIVOTEK Recording Software Main Page Conguration Area Live Video Window The following window is displayed when the video mode is set to MPEG-4: Page The following window is displayed when the video mode is set to MJPEG: Client Settings Page Conguration System Page Security HTTPS (Hypertext Transfer Protocol over SSL) https:// Page Page Page Network PPPoE (Point-to-point over Ethernet) Page Page Page Page HTTP Advanced Mode Page Page RTSP Streaming Page Wireless LAN (PZ7112/PZ7122 only) Page Page DDNS Page Access List Page Page Audio and Video Page Page Page Page Audio Settings Motion Detection Page Camera Control Page Page Homepage Layout Page Page Application Page Page Page Page Page Page Page Page Media Settings Page Page Recording Page Page System Log View Parameters Maintenance Page Upgrade Firmware Page Appendix URL Commands for the Network Camera Overview Style Convention General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Set Server Parameter Values Page Available parameters on the server Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Drive the digital output Query Status of the Digital Input Query Status of the Digital Output Capture Single Snapshot Account Management 118 - User's Manual System Logs Upgrade Firmware Post data: Camera Control Recall Preset Locations System Information IP Filtering Get SDP of Streams Open the Network Stream Technical Specications External View Mounting KitEnclosure Specications Pan/Tilt Range Technology License Notice Electromagnetic Compatibility (EMC)