Microphone control functions

1.Grill - Protects the microphone cartridge and helps reduce “breathy” and wind noise pick-up.

2.Display Screen - Displays the microphone’s current Frequency/Channel and the batteries’ charge level.

3.Up and Down (^ and v) buttons - Use to navigate through the Frequency/Channel select menu on the microphone, when choosing a frequency.

4.0 (select) button - Use to make a selection when navigating through the Frequency/Channel select menu on the receiver.

5.Power switch - Turns the microphone on and off. Slide up to turn the mic on and slide down to turn the mic off.

6.Battery compartment - Removable lid hides and protects the microphone battery.

7.RF Power HI / LOW switch - Allows you to set the RF power level. Set to Low when you are in a smaller room and the mic is relatively close to the receiver (i.e. living room and small stage). Set to High, to increase the RF power level when the singer is a farther distance away from the receiver (i.e. large stages and clubs).

8.Microphone Lock switch - Switch On to lock the ^ and v buttons on the mic so that the singer does not accidentally change the frequency while holding the mic. Switch the lock Off when changing the microphone’s frequency.

Microphone

1

2

3

4

5

6

7

8

FRONTBACK

13

Page 14
Image 14
VocoPro UHF-6800 owner manual Microphone control functions