Getting started cont.

Setting Up on Stage

If you will be using the UHF-6800 with stage monitors and/or a P.A. system, try the following:

Place the stage monitor directly behind the microphone.

Locate the P.A. loudspeakers so that they point away from the rear of the microphone. (With the speakers located in these positions, the possibility of feedback is greatly reduced).

Always check the stage setup before a performance to ensure optimum placement of microphone and monitors.

IMPORTANT: Every wireless microphone installation is a unique situation, and can present a variety of problems. Never attempt a live performance without first conducting a “walkthrough” test of the system in the performing area. If major changes (additional wireless systems or intercoms, relocation of scenery, etc.) have been made since the last walk-through test, check the wireless system again, as close to performance time as possible.

9

Page 10
Image 10
VocoPro UHF-6800 owner manual Setting Up on Stage