Important Instructions
Your Vornado Air Circulator has a polarized plug. (One blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING – To reduce the risk of fire or electrical shock, do not use this product with any solid state speed control device. To reduce the risk of fire or electric shock and injury to persons, do not use in a window. This product employs overload protection (fuse). A blown fuse indicates an overload or
Do unplug your Tower Circulator before cleaning. Do clean your Vornado Tower Circulator regularly.
Refer to the CLEANING instructions provided. Never clean the air circulator in any manner other than as instructed in this manual.
Do Not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning. Do Not immerse this product in water or allow water to drip into the motor housing. Do Not use near furnaces, fireplaces, stoves or other
Do Not use this product outdoors.
Do Not use this product on wet surfaces.
Do Not use this product in a bathtub or shower.
Do Not use this product if it has a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
Do Not carry this product by the cord, or use the cord as a handle. Do Not attempt to repair or replace parts.
Do Not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
Do Not operate the Tower Circulator on an elevated surface, such as a shelf or desktop, use only while placed on the floor.
Do use common sense when using this product and/or any electrical appliance.
Important Instructions
This product employs overload protection(fuse). A blown fuse indicates an overload or
If the replacement fuse blows, a
User Servicing Instructions
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
Open fuse cover (A.) by sliding access cover on top of attachment plug towards blades.
Remove fuse (B.) carefully by gently prying out the ends of the fuse from the receptacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. Contact Vornado customer service for replacement fuse. Phone:
Install replacement fuse (C.) by first placing the end of the fuse into the fuse receptacle which is opposite of the blades of the plug, then carefully push in the other end. Only push against the metal end of the fuse, not the glass center portion.
Close the fuse access cover (D.) by sliding the cover back into the plug until it is completely closed, latches and is flush with the face of the plug.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged.
4English
