6 | ENGLISH

TELESCOPIC POLE

The Telescopic Pole is made up of four sections (FIGURE 1):
• TOP (SECTION 1)
• MIDDLE-TOP (SECTION 2)
• MIDDLE-BOTTOM (SECTION 3)
• BOTTOM (SECTION 4)
SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks, these sections
may be extended or retracted in order to achieve the desired length. Refer to Adjusting Telescopic
Pole section on Page 7 for more details.
NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This is the
section that ts into the Pole Base.

CONNECTING TELESCOPIC POLE

1. Make sure Pole Base coupling is loosened – rotate
it counter-clockwise if necessary.
2. Look down inside Pole Base, and locate two guide
ridges (FIGURE 2-A). Align guide grooves on
Telescopic Pole (FIGURE 2-B) with guide ridges
inside Pole Base.
3. With guide grooves aligned with guide ridges, insert
SECTION 4 of Telescopic Pole into Pole Base
(FIGURE 2-C).
NOTE: If you have trouble locating two guide
ridges inside Pole Base, insert SECTION 4 of
Telescopic Pole into Pole Base, then twist pole to
properly align the guide grooves and guide ridges.
4. Screw coupling clockwise to lock Telescopic Pole
in place (FIGURE 2-D). Telescopic Pole should now
be secured to the Pole Base.
Assembling Your
Everyday Fabric Steamer
FIGURE 1
FIGURE 2
2-A
2-B
2-C
2-D