3)Output Bias: This allows for specific biasing of your amplifier.

￿82 Warm: This setting will run your amplifier at about 22 watts clean (before clipping) which is similar to an early 4 input AC30. What this means to you is that you’ll have less clean headroom and get a warmer sound at lower volume levels plus your tube life will be prolonged.

￿50 Hot: This setting will run your amplifier at about 33 watts clean (before clipping) which is similar to a standard 6 input AC30. The tubes will be running hotter but you will have more clean headroom.

4)Smoothing: This changes the values of the filter caps within your amplifier.

￿22µf Vintage: This setting is similar to vintage AC30s where your sound will be more open and loose. You may experience slightly more “hum” when the amp is idling.

￿44µf Modern: As the name would suggest, this is going to act more closely to a modern AC30 such as the hand wired AC30HW. Your sound will be tighter and the amp will run quieter.

5)FX Loop: This is where you can hook up external processors such as rack or stompbox effects.

￿Level -10/+4 dB: If you run a rack processor through the FX Loop set the Level switch to +4. If

you run a stomp box effect set the level to -10.

NOTE: There is no rule set in stone for these levels. Please try both settings and use what works best for you as every playing and effect situation will be different.

￿FX Send: Think of this as the “output” of the FX loop and will be connected to the input of your effect(s).

￿FX Return: Think of this as the “input” of the effects loop and will be connected to the output of

your effect(s).

NOTE: Be sure to use shielded guitar cables only! NEVER use unshielded speaker cables.

￿FX Loop Bypass ON/OFF : This is a true bypass effects loop which means if this is set in the “off” position, absolutely none of your original signal will be running through it until it’s switched “on”.

6)Footswitch jack: This is where you connect the supplied VOX footswitch so you can turn the Reverb and Tremolo on and off.

7)HT Fuse: This fuse protects your amp should a fault occur with the power. The most common reason for this fuse to blow is when an output tube becomes faulty. The correct vale of the HT fuse is located on the rear panel of the amplifier and should only be replaced with one of the same value.

8)Mains Input: This is where the supplied, detachable Mains (power) cord is connected. The specific mains input voltage rating that your amplifier needs to run at is located on the rear panel of your amplifier. Before making any connections or powering up the amplifier, make sure the correct voltage is set. If you have any doubt, refer to your local VOX dealer.

9)Mains Fuse: This fuse provides an overall safety protection in the event your amplifier develops and electrical fault. The correct value of the fuse is located on the rear panel of your amplifier and should only be replaced with one of the same value.

9

Page 8 Page 10
Page 9
Image 9
Vox AC30CC2X, AC30CC1, AC30CCH owner manual
Page 8 Page 10

AC30CC2, AC30CCH, AC30CC2X, AC30CC1 specifications

The Vox AC30 series has long been a staple in the world of guitar amplifiers, renowned for its distinct sound and robust construction. The AC30CC1, AC30CC2X, AC30CCH, and AC30CC2 are four models in this celebrated line, each offering unique features and technologies that cater to various player preferences.

The Vox AC30CC1 is a single 12-inch speaker combo amplifier that boasts a vintage tone and a solid-state rectifier. This model provides two channels: Normal and Top Boost, allowing players to switch between clean and overdriven sounds seamlessly. With built-in reverb and tremolo effects, it captures the classic sounds that Vox is known for. Its lightweight design makes it easy to transport, while the iconic Vox styling remains a nod to its long-standing heritage.

The AC30CC2X features two 12-inch speakers, which enhances its overall sound projection and richness. This model also offers the dual-channel configuration, but with the addition of Celestion Alnico Blue speakers, it enhances the tonal fidelity and depth, making it ideal for more experienced players seeking a fuller sound. Like the CC1, it includes built-in reverb and tremolo, ensuring that musicians have essential effects at their fingertips.

For those who prefer a head format, the AC30CCH delivers the same legendary sound in a more versatile package. It can be connected to any speaker cabinet, allowing guitarists to customize their rig. This model is equipped with the same Normal and Top Boost channels, alongside built-in effects. Its tube-driven circuit design ensures that players enjoy the warmth and character that Vox amplifiers are famed for, while its durable construction means it is built to withstand the rigors of touring.

Lastly, the AC30CC2 is a more advanced variant that combines the features of the CC1 and CC2X in a two-channel combo amp format. It includes two Celestion speakers for fuller sound and improved low-end response. This model often becomes the go-to for those seeking the classic Vox chime combined with modern capabilities, making it a favorite among both recording artists and live performers.

Overall, each model in the Vox AC30 series offers players a unique blend of vintage charm and modern convenience, making them versatile tools that shape the sound of music across genres. With their rich tonal palette, built-in effects, and high-quality construction, the AC30 amplifiers continue to be a top choice for musicians around the world.
Top Page Image Contents