Vox E 1 owner manual Vibe, Octave, Treble Boost Treb BST, Tube OD

6. U-VIBE

Modelled on the famous Univox Uni-Vibe - a phase/vibrato effect that was designed to simulate a rotating speaker and produces a wonderfully seductive and “watery” tone. Interestingly enough, the guy responsible for this great pedal is also responsible for the birth of the remarkable Valve Reactor Technology used in the power amp of your ToneLab.

[1]	“SPEED”	1.00	...10.00[Hz]	Adjusts the speed of the Uni-Vibe effect.
[2]	“MIX”	0.0...	10.0	Adjusts the mixture of direct sound and vibrato.
[3]	“DEPTH”	0.0...	10.0	Adjusts the depth of the Uni-Vibe effect.

STEP ON IT! With the pedal of the optional foot selector (you’ve bought one by now, right!?) you can control the speed of the vibrato.

7. OCTAVE

This effect generates a note one octave lower than the one you’re playing, adding thickness and “weight” to single note lines.

[1] “1OCTAVE” 0.0...10.0 Adjusts the mix level of the note one octave below.

[2] “DIRECT” 0.0...10.0 Adjusts the level of the original note.

[3] “2OCTAVE” 0.0...10.0 Adjusts the mix level of the note two octaves below.

WARNING! Like all pedals of this type, OCTAVE only works with single

notes...chords confuse the heck out of it! NOT a fault - that’s just the way these pedals are...deal with it, dude!

8. TREBLE BOOST (TREB BST)

This pedal effect is modelled after a treble booster that was designed with the VOX AC30 specifically in mind. It is a great way of adding “teeth” to an overdriven sound.

9. TUBE OD

This model is based on an overdrive pedal that’s housed in a garish, “seasick green” box and is considered an all-time classic due to the wonderfully warm tones it produces.

10. FAT OD

Based on a pedal named after one of the most disliked rodents to ever walk the planet! The result is a smooth distortion rich in harmonics...nasty but nice.

11. FUZZ

Retro, rude “n” raw...get the picture!? The name says it all.

[1]“DRIVE” 1.0...10.0 Adjusts the amount of distortion (boost).

[2]“TONE” 1.0...10.0 Adjusts the tone.

[3]“LEVEL” 0.0...10.0 Adjusts the output level.

36