1.Press the UTILITY button (3.4) to make the button light.
2.Press the 1/PREV or 2/NEXT button (3.3) to make the name display (3.8) read “EXP ***”. The parameter will change each time you press a button.
3.Use value knob 3 (2.5) or the ▲, ▼ buttons (3.2) to specify the target.
“EXP ***” selects the expression target (i.e., the effect that will be controlled). The parameter that will be controlled will depend on the effect you select.
|
|
|
| Expression target | Type | Parameter that is | |
|
|
|
| controlled | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
“EX |
| P |
| Control nothing | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VOX WAH | “PEDAL” parameter of VOX |
|
|
|
|
|
| WAH | |
|
|
|
|
|
|
| |
“EX |
| P |
| PDL” | PEDAL effect |
| |
|
| “SPEED” parameter of U- | |||||
|
|
|
|
|
| ||
|
|
|
|
|
| VIBE | |
|
|
|
|
|
|
| |
|
|
|
|
|
| Other than FLANGER | “SPEED” parameter |
“EX |
| P |
| MOD” | MODULATION effect | ||
|
| FLANGER | “MANUAL” parameter | ||||
| |||||||
“EX |
| P |
| DLY” | DELAY effect | All types | Input level to DELAY effect |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Input level to REVERB |
“EX |
| P |
| REV” | REVERB effect | All types | |
|
| effect | |||||
|
|
|
|
|
|
|
HINT: If you set the PEDAL effect type to “VOX WAH” or
effect back to another type without performing any other operation, the target set- ting will also automatically return to its previous setting.
NOTE: If the target effect is OFF, nothing will be controlled. In the case of the PEDAL effect, nothing will be controlled except for “VOX WAH” or
4.To set the minimum (MIN) value for the foot controller, press the 2/NEXT button (3.3) to make the name display (3.8) show “EXP MIN.”
5.Use value knob 3 (2.5) or the ▲, ▼ buttons (3.2) to specify the minimum value of the target range.
This determines the range in which the target parameter will vary when you operate the expression pedal. “EXP MIN” sets the lower limit, and “EXP MAX” sets the upper limit.
When you operate the expression pedal, the target parameter will change within the range that you specify here.
6.To set the maximum (MAX) value for the foot controller, set “EXP MAX” as described in steps 4 and 5.
7.To set the initialization (INIT) value for the foot controller, press the 2/NEXT button (3.3) to make the name display (3.8) show “EXP INIT.”
| Tuner |
|
|
|
|
|
|
|
| Foot | Controller |
|
|
|
|
|
|
| MIDI/DIGITAL |
|
| Factory | settings |
| Trouble- | shooting |
| Spec. |
|
| Program | List |
|
|
|
43