OPTIONALHEADSETINSTALLATIONANDOPERATINGINSTRUCTIONS
Your VTECH VT 9151/VT 9155 cordless telephone is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for
If you choose to use the Headset option, you must do the following:
INSTALLATION
• Obtain an optional accessory Headset, which is compatible with the VTECH VT 9151/VT 9155.
Please contact VTech Communications Customer Service,
•Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset of your VTECH VT 9151/ VT 9155. Connect the plug on the Head- set to the jack on the cordless Hand- set. The plug should fit securely. Do not force the connection. See illustration.
HEADSET JACK &
BELT CLIP
LOCATION
•The VTECH VT 9151/VT 9155 is also equipped with a detachable belt clip. Align the pins on the inside edge of the belt clip with the notches on the side of the VTECH VT 9151/VT 9155 handset. The belt clip should snap securely into place. Do not force the connection. See illustration.
OPERATION
NOTE: Whenever a compatible Headset is connected to the cordless Handset, the
microphone on the Handset will be MUTED. This is done to limit the effect of background noise.
•The following operational characteris- tics apply to VTech Headsets. The same may also apply to other
•The VTech brand compatible Headset has a monaural design which is revers- ible, so you can wear your Headset on either the left or right ear, leaving one ear free for room conversation.
ON RIGHT EAR ON LEFT EAR
•The head band can be adjusted to fit the contour of your head. Using both hands, slide the head band up or down so that it rests comfortably on your head with the speaker cushion centered against your ear.
•For maximum sound quality, the flexible microphone should be posi- tioned at the corner of your mouth, about one inch from your mouth.
ONE |
INCH |
31 |
