VTech VT 9155, 9151 important safety instructions Rbrctm Seal, To install the Spare Battery Pack

REPLACING THE HANDSET BATTERIES

To install the Spare Battery Pack:

1.Open the base unit battery compartment.

2.Place the spare battery pack in the battery compartment. Make sure the metal contacts on the underside of the battery are aligned with charging contacts in battery compartment.

3.Replace the battery compartment cover.

4.When the battery is installed properly, the spare battery LED on the base unit will be illuminated.

5.The spare battery will be fully charged after 24 hrs. Please note that the spare battery LED will always be illuminated when a spare battery is installed.

The RBRCTM Seal

The RBRC® Seal on the (easily removable) nickel-cadmium battery (contained in our product) indicates that VTech Communications,Inc. is voluntarily participating

in an industry program to collect and recycle these batteries at the end of their useful lives,when taken out of service within the United States and Canada.

The RBRC® program provides a convenient alternative to placing used nickel-cadmium batteries into the trash or municipal waste,which may be illegal in your area.

VTech’s partnership with RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers. Please call 1-800-8-BATTERYTMfor information on Ni-Cd battery recycling and disposal bans/restrictions in your area.VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.

RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.

7