VTech BS5822 user manual To register your accessory handsets

Installation

To register your accessory handsets

Your phone comes with a handset which is already registered as Handset 1.. Your phone can operate up to four handsets, to order additional handsets call the supplier..

1.After charging the battery, the screen will display:

2.On the base unit, press MENU/SEL, then scroll to DISPLAY BASE ID, press MENU/SEL.

3.Enter the 15 digit base unit ID code, if you make a mistake, press the DELETE/MUTE key to backspace (delete characters), then enter the correct information..

4.Press MENU/SELECT to complete the registration process..

5.Once a valid base ID code has been entered, the display will go blank for a second or two, and then show:

6.If the base accepts the new handset, after several seconds the new handset will show:

Re-register existing handsets to a new base

1.Install your new base unit, the handset(s) will display SEARCHING…, press and hold the MENU/SELECT button for two seconds..

2.The handset will display:

3.Follow steps 2 through 6 in To register your accessory handsets, above..

ENTER BASE ID

###############

SEARCHING...

HANDSET 2

SEARCHING...

ENTER BASE ID

###############

•The 15-digit base ID code may contain numbers and characters, including 0 through 9 and *.. Make sure you enter all 15 digits..

•If you do not enter the correct digit sequence, you will hear an error tone.. Press

DELETE/MUTE key to backspace to erase a character(s) and carefully re-enter the base ID code..

Getting started