6
Mute
The mute function allows you to hear the other party but the other party cannot hear you.
During a call, press MUTE. Th e screen displays Muted.
Press MUTE again to resume the conver sation. The screen displays
Microphone on briey.
Call waiting
When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are already on a call.
Press FLASH to put the current cal l on hold and take the new call.
Press FLASH at any time to switch back and fo rth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of that handset
without disconnecting the call. The next call rings normally at the preset volume.
Press OFF or MUTE, then displays and Ringer muted dis plays briey.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call.
During a call, press TONE .
Use the dialing keys to enter the relevant number. The teleph one sends
touch-tone signals.
The telephone automatically returns to pulse dialing mode after you end the call.
Find handset
Use this feature to nd all system handsets.
To start paging:
Press FIND HANDSET on the te lephone base. All idle
handsets ring and display ** Pa ging **.
To end paging:
Press FIND HANDSET on the te lephone base.
Press , , OFF or any dialing key on a handset.
Place the handset in the telephone b ase or charger.
Do not press and hold FIND HANDSET for more than four seconds. It may lead to
handset deregistration.
Redial list
Each handset stores the last 10 telephone numbers dialed. When there are already
10 entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list:
Press REDIAL when the hands et is not in use.
Press , or REDIA L repeatedly until the desired entr y displays.
Press or to dial.
To delete a redial entry:
When the desired redial entry displays, press DELETE.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial list while you are on a call. Chain dialing can be useful if you
wish to access other numbers (such as bank account numbers or access codes)
from the directory, caller ID log or redial list.
To access a number in the directory, caller ID log or redial list while on a call:
To enter the directory, press MENU twice.
-OR-
To enter the caller ID log, press MENU then scr oll to C aller ID log then
press SELECT.
-OR-
To enter the redial list, press REDIAL.
Scroll to the desired entry.
Press SELECT to dial the displayed nu mber.
Join a call in progress
You can use up to two system handsets at a time on an outside call (for models with
two or more handsets).
When a handset is on a call, press or on another handset to join the call.
Press OFF or place the handset in the te lephone base or charger to exit the
call. The call continues until all h andsets hang up.
1.
2.
1.
2.
3.
1.
2.
3.
1.
2.
3.