Answering system operation
Call screening
If you wish to listen to caller’s leaving their message before choosing to answer a call, follow these steps:
1.Set the playback VOL on the base unit to a level greater than 1 by pressing 
or 
.
2. If you decide to answer a call while the caller is leaving a message, simply press TALK/FLASH on the handset. The answering system will stop and you can begin speaking to the caller.
Access code
To retrieve new messages from any touch tone phone from a remote location, an access code is required. The remote access code can be any two digit number between 10 and 99. The remote access code has been set to 19 at the factory but it can be changed at any time for your convenience.
Set remote access
1.Press SETUP twice, the system announces “Remote access code. To change the setting, press CHANGE.”
2.Press CHANGE, the system announces the current setting (the default remote access code is 19.)
3.Press and release CHANGE to advance the remote access code number by one. Press and hold CHANGE to advance the remote access code by 10.
4.When the desired number is announced. Press SETUP to save and advance to the next menu option. Or press PLAY/STOP 
/ 
to save and exit.
Basic operation
www.vtechphones.com | 33 |
