VTech USB 7100 manual Belt clip & optional headset, Software installation & use

Getting Started

Belt clip & optional headset

Install belt clip as shown below if desired.

For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately).

Insert belt clip tabs into notches on back of handset, then rotate to snap in place.

Plug 2.5 mm headset (purchased separately) into jack on side of handset, beneath small rubber cap.

Getting Started

Software installation & use

To make and receive Internet calls, you must install onto your computer Vtech™ and Skype™ software. Use the CD-ROM included with your telephone to down- load and install the latest version of software.

Insert CD-ROM and wait for opening screen to be displayed.

Click to begin, then follow the instructions on screen to complete the software installation.

NOTE: At the pop-up screen after software installation, click “Allow this program to use Skype,” then click OK.

8 9