ADVANCED OPERATION
HEADSET OPERATION
Your VT 9152 cordless telephone is equipped with a 2.5mm Headset Jack for use with an accessory Headset for
Locate the Headset Jack on the VT 9152 handset. Connect line plug on the Headset cord to the jack on the cordless Handset. The plug should in securely. Do not force the connection.
BELT CLIP
*The VT 9152 is also equipped with a detachable
belt clip. Align the pins on the inside edge of the belt clip with the notches on the side of the VT 9152 handset. The belt clip should snap securely into place. Do not force the connection. See Illustration.
OPERATION
NOTE: Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Hand- set will be MUTED. This is done to limit the effect of background noise.
*The following operational characteristics apply to VTECH Headsets. the same may also apply to
other
* The VTECH brand compatible Headset has a monaural design which is reversible, so you can wear your Headset on either the left or right ear, leaving one ear free for room conversation.
* The headband can be adjusted to fit the contour of your head. Using both hands, slide the headband up or down so that it rests comfortably on your head with the speaker cushion centered against your ear.
*For maximum sound quality, the flexible micro- phone should be positioned at the corner of your mouth, about one inch from your mouth.
18
