BASIC OPERATION
MAKING CALLS
Method | Live Dialing |
Press PHONE. Dial the phone number.
Press OFF to end your call.
Method |
|
Dial the phone number. Use the
key to backspace if you make a dialing mistake. Then press PHONE.
Press OFF to end your call.
When the handset is in use, the IN USE/CHARGE light on the Base Unit will flash. When the Handset is in the Base Unit cradle, the IN USE/CHARGE light glows steadily.
VOLUME CONTROL
While you are on a call, press | to raise the inbound volume and | to lower it. The handset |
will display the relative volume setting as you adjust it. |
| |
CHANNEL CHANGING
If you experience noise or interference while on a call, you may be too far from the Base Unit, or in an obstructed area. Try moving to a different location. If this does not improve the transmission, press PROG/CHAN. You can press this key more than once, if necessary.
NOTE: This feature only operates while you are on an active call.
BASIC OPERATION
11
