VTech VT 9162 Getting Started Setting UP Your VT9162, Ringer Selection, TONE/PULSE Selection

GETTING STARTED

SETTING UP YOUR VT9162

When fully charged, you will experience up to 5 hours of continuous talk, or up to 6 days of standby (off the cradle, but not in use).

RINGER SELECTION

1. Press PROG/CHAN.

2. Press or until RINGER is displayed.

3.Press SELECT. The current selection will be dis- played, and you will hear a sample of the selected ring.

4.	Press	or	to select a different ring style (there
	are 4), or turn the ringer OFF.
5.	Press SELECT to confirm your choice.

NOTE: If the ringer is set to OFF, the display will

show “RINGER OFF” in idle mode.

TONE/PULSE SELECTION

NOTE: Your VT 9162 is factory-preset for TONE dialing.

1. To change dialing mode, press PROG/CHAN,

2.	Press	or	until DIAL MODE is displayed.
3.	Press SELECT. The current setting is displayed.
4.	Press	or	to change the setting.

5. Press SELECT to confirm your choice.

ANSWERING SYSTEM - INTRODUCTION

Your VT9162 includes a digital answering system in the Base Unit. Setup of the answering system is easy. Step by step instructions can be found in the section entitled Answering System Setup, later on in this user’s manual.

8