Manuals / Vulcan-Hart / Kitchen Appliance / Fryer

Vulcan-Hart 1GR65DF ML-136789, 3GR45DF ML-136427, 2GR45DF ML-136424 Operation, Filtering Procedure

Models: 1GR65CF ML-136792 1GR65C ML-136415 1GR65D ML-136412 1GR45C ML-136414 1GR45CF ML-136791 1GR85C ML-136416 1GR45D ML-136411 1GR45DF ML-136778 1GR65DF ML-136789 1GR85DF ML-136790 1GR85CF ML-136793 1GR85D ML-136413 2GR45CF ML-136431 2GR45DF ML-136424 3GR45DF ML-136427

1 27

Download 27 pages 3.39 Kb

Page 21

Operation

GRDF / GRCF SERIES GAS FRYERS

Operation

Hot oil and parts can cause burns. Use care when operating, cleaning and servicing the fryer.

Spilling hot frying compound can cause severe burns. Do not move fryer without draining all frying compound from the tank.

Never run water or boil out solution through filter and motor / pump. Doing so will void your fryer warranty.

FILTERING PROCEDURE

Oil Temperature should be 300-350° F. Use the provided crumb scoop to remove and suspend crumbs on the bottom of the tank before proceeding to Step 1.

1. Do not turn off the Fryer. The power must be on throughout the entire filtering process.

Do NOT heat the fryer during the filtering procedure. Permanent damage to your fry tank may occur and warranty may be voided.

2.Vulcan recommends adding an oil treatment media to the oil prior to filtering.

3.Make sure that the filter drawer is closed completely and that the suction tube and receptacle block are in the correct position. Fig. 5

Fig. 5

VULCAN-HART

F-32933 Rev. G (May 2009)

-21-

Image 21

Vulcan-Hart 1GR65DF ML-136789, 3GR45DF ML-136427, 2GR45DF ML-136424, 2GR45CF ML-136431 manual Operation, Filtering Procedure

Contents

INSTALLATION & OPERATIONAL MANUAL GRD & GRC SERIES GAS FRYERS With KleenScreen PLUS Filtration SystemsMODELS FOR YOUR SAFETY IMPORTANT FOR YOUR SAFETYTABLE OF CONTENTS ORDERING PARTS INTRODUCTIONUNPACKING GENERALINSTALLATION Fryer Model No Device Serial No ClearancesLocation CODES AND STANDARDS ASSEMBLYIn the United States In CanadaFLUE CONNECTION Use soap and water solution. Do not use an open flameELECTRICAL CONNECTION GAS CONNECTIONTESTING THE GAS SUPPLY PIPING SYSTEM GAS PRESSURES ALL MODELSFryers with Casters OVER-TEMPERATURE SHUTDOWN LEVELING THE FRYEROPERATION Cleaning BEFORE FIRST USEFILLING TANK WITH SHORTENING EXTENDING SHORTENING LIFE BASIC FRYING INSTRUCTIONFry Basket Guidelines Fry Basket CapacityTURNING ON THE FRYER EXTENDED SHUTDOWNFILTERING THE OIL GRDF / GRCF SERIES GAS FRYERS Programming the Solid State ControlVULCAN-HART F-32933 Rev. G MayGRDF / GRCF SERIES GAS FRYERS Programming the Computer ControlVULCAN-HART F-32933 Rev. G MayBOIL OUT PROCEDURE Weekly or when oil is replacedDRAINING THE TANK Daily CLEANINGKleenScreen Plus Filtration System Installation and Operational Manual for “DF” and “CF” ModelsGRD/CF and 2XGD/CF Models GAS KleenScreen PLUS ModelsFiltering Instructions for KleenScreen PLUS Fryers AssemblySuction Tube Filter Screen Filter Insert Knurled Bottom Fitting GeneralMicro-Filtration Fabric Envelope Assembly Fully assembled filter screen assemblyFabric Envelope Insert Different from Screen Assembly Fabric Envelope Secure Tube with Suction Tube Clip Filter Screen LaysDO NOT WASH FABRIC ENVELOPE INSTRUCTIONS TO REMOVE & REPLACE KLEENSCREEN PLUS FILTER ENVELOPEStep StepOperation FILTERING PROCEDUREGRDF / GRCF SERIES GAS FRYERS VULCAN-HARTF-32933 Rev. G May GRDF / GRCF SERIES GAS FRYERS VULCAN-HARTF-32933 Rev. G May FILTERING TIP REMOVING EXCESS DEBRIS FROM THE SCREEN FILTERFLUSH AND DISCARD THERMAL OVERLOAD PROTECTION BUTTON BOIL OUT PROCEDUREALARMS AND ERROR MESSAGES MAINTENANCEService in the US and Canada FLUE VENT INSPECTIONTroubleshooting Chart