Vulcan-Hart 1GR85DF ML-136790 Installation, Fryer Model No Device Serial No Clearances, Location

GRDF / GRCF SERIES GAS FRYERS

INSTALLATION

Do not use the door or its handle to lift the fryer.

Before installing the fryer, verify that the type of gas (natural or propane) agrees with the specifications on the fryer data plate, which is located on the inside of the door panel. Make sure the fryer is configured for the proper elevation.

Record your fryer model, device, and serial numbers for future reference in the space provided below. This information can be found on the fryer data plate.

Fryer Model No: ___________________________

Device: ___________________________________

Serial No: ________________________________

Clearances

ŠMinimum clearance from combustible construction:

6” (15 cm) from the sides of the fryer 6” (15 cm) from the back of the fryer

The fryer may be installed on combustible floors

ŠMinimum clearance from noncombustible construction:

0” from the sides of the fryer 0” from the back of the fryer

ŠBetween the fryer and any open-top flame units: 16” (41 cm)

ŠAllow space for servicing and operation.

Location

ŠInstall fryer in an area with sufficient air supply for gas combustion at fryer burners.

ŠDo not obstruct the flow of combustion and ventilation air.

ŠProvide adequate clearance for air openings into the combustion chamber.

ŠDo not permit fans to blow directly onto fryer.

ŠAvoid wall-type fans, which create cross-currents within a room. Avoid open windows next to sides or back.

VULCAN-HART F-32933 Rev. G (May 2009)

-5-